325-L SERIES Lever Acting Design for 2 psi Piping Systems
✔ Maxitrol’s 325-L Series line pressure regulators are for 2 psi piping systems. 325 Series regulators are for use on residential, commercial, and industrial applications.
✔ The 325 Series features a high leverage linkage assembly to deliver positive dead-end lockup. The regulators are capable of precise regulating control from full flow down to pilot flow. 
✔ Suitable for multi-positional mounting. If ball check vent limiting device is installed, mount in an upright position only. 
Imblue Technology™ 325-3L, 325-5L, 325-7AL, 325-9L models may be ordered with Imblue Technology™. Imblue Technology™ increases corrosion resistance and provides extra protection against the elements for regulators used in outdoor applications. Add suffix letter “B” to model number when ordering.  
NOTE: Capacities are used to determine the maximum multiple appliance load. The largest single appliance served by the regulator should not exceed the maximum individual load specified above
NOTE: All Maxitrol gas pressure regulators should be installed and operated in accordance with Maxitrol Safety Warning Instructions
Certifications: ANSI Z21.80/CSA 6.22 Line Pressure Regulators.
Gas Type: Suitable for natural, manufactured, mixed gases, liquefied petroleum gases, and LP gas-air mixtures.
Rated Inlet Pressure: 2 psi (13.8 kPa) / Maxitrol Rated: 10 psi (69 kPa)
Ambient Temperature Ranges: -40 to 205°F (-40 to 96°C)
Capacity: 500,000 Btu/h


Buy "Maxitrol- Line Pressure Regulators" now

CHECK IT OUT on amazon.com
Comments (0)

Leave a Reply

Your email address will not be published. Required fields are marked *